For cooling of 160 mm deep modules. Fan for cooling of 220 mm deep modules on request.
M5-0.8 HEX Nut,DIN934, steel chromated, 500pcs
- Screw M6x16
- DIN7985
- Pan Head
- Steel, Nickel
- Package qty is 500 pcs per bag
- $0.18 each @ 500 pcs per bag
- Square nut M2.5, 5x5mm
- DIN562
- steel, galvanized, chromated
- Package qty is 500 pcs per bag
- Screw, M2.5x20
- DIN84
- Pan Head
- Package qty is 500 pcs per bag
- $.31 each @ 500 pcs per bag.
- Screw M4x16, DIN933
- Hex head, Steel, galvinized, chromated
- DIN933
- Package qty is 500 pcs per bag
- Marking plate
- F3 Poly grey
- Package qty is 100 pcs per bag
- $2.75 each @ 100 pcs per bag.
Hex Screw, M5-0.8 X 50mm, 100 pcs
- Z-rail - 15HP
- 75mm long
- M2.5 tap
- 14 holes
- 5 pcs per box
- Z-rail - 31HP
- 156mm long
- M2.5 tap
- 30 holes
- 5 pcs per box
-
- Z-rail - 42HP
- 212mm long
- M2.5 tap
- 41 holes
- 5 pcs per box
- Screw M3.5x13
- Countersunk, sheet metal
- Stainless steel, galvanized, chromated
- DIN7991
- Package qty is 500 pcs per bag
- $.19 each @ 500 pcs per bag.
- Screw M4x12
- Hexagon head, .8mm thick head, Similar to DIN933
- Steel, galvanized, chromated
- Package qty is 500 pcs per bag
- $.31 each @ 500 pcs per bag.
-
- Z-rail - 84HP
- 425mm long
- M2.5 tap
- 83 holes
- 5 pcs per box
- Z-rail - 84HP
- 425mm long
- M2.5 tap
- 3.8mm holes
- 5 pcs per box
- Side panel BGT-U
- 3U-160 colorless chromated
- Package qty is 10 pcs per bag
- $24.50 each @ 10 pcs per bag.
- Cover plate 84HP-160
- screw on, colorless chromated
- Package qty is 10 pcs per bag
- $18 each @ 10 pcs per bag.
- Integrated washer!
- 1000 pcs per bag
- 4X16
- DIN 933
- 8.8 Steel plain finish
- Full Thread. $0.18 each @ 1000 pcs per bag
- Screw
- Self tapping
- 2.5-5
- Package qty is 500 pcs per bag
- $.10 each @ 500 pcs per bag.
- Screw oval M5-16
- DIN7985
- Pan Head
- Steel
- With Washer DIN125
- Package qty is 100 pcs per bag
- $0.25 each @ 100 pcs per bag
- Screw M2.5 x10
- Self tapping screw
- DIN7985
- DIN7500
- steel, galvanized, chromated
- Package qty is 250 pcs per bag
- $.11 each @ 250 pcs per bag.
- Handle 3U
- Anodized aluminum
- 2pcs M4x10
- Torx screw countersunk 409-105-789 included with each handle
- Package qty is 10 pcs per bag
- $19.50 each @ 10 pcs per bag.
- Handle 6U
- Anodized aluminum
- 2pcs M4x10
- Torx screw countersunk 409-105-789 included with each handle
- Package qty is 10 pcs per bag
- $23.75 each @ 10 pcs per bag.
For subrack FLEXIBLE Card Guide ECONOMY An inexpensive snap-in card guide that can also be secured to the horizontal rails with self tapping screws. Technical data Material Lexan 500 Color gray Continuous temperature – 40 °C up to + 115 °C Fire protection class UL 94 V–0
- Screw, M4x16
- 7mm, Torx T20
- Hexagon Head
- Steel, Galvanized, Chromated
- Package qty is 500 pcs per bag
- $.15 each @ 500 pcs per bag.
- Card guide
- 1.6-220
- 2.5 nut
- Package qty is 100 pcs per bag
- $1.59 each @ 100 pcs per bag.
Feet Kit package includes:- 2 feet with tip-up
- 2 feet without tip-up
- 4 self-tapping screws
- Color black
- 10 kits per bag priced @ $16 each
- Card guide
- 1.6-220
- Slide-in
- Package qty is 100 pcs per bag
- $1.49 each @ 100 pcs per bag.
Bearing Bushing 4 for handle 4 HP Material: steel, galvanized Finish: colorless chromated Qty 50 per bag
- Screw M2.5x8
- Countersunk, self tapping
- Steel, galvanized, chromated
- DIN 965
- DIN 7500
- TAPTITE
- Package qty is 500 pcs per bag
- $.12 each @ 500 pcs per bag.
- Screw M2.5x6
- Countersunk, self tapping
- Steel, galvanized, chromated
- Similar to DIN 965
- Similar to DIN 995
- TAPTITE ISO 7046
- Package qty is 500 pcs per bag
- $.09 each @ 500 pcs per bag.
- Hinge Block Kit
- Pair (Left and Right)
- Includes 409-070-510 and 511
- Package qty is 10 kits per bag
- $18 each @ 10 pcs per bag.
- Order with countersunk screw 409-070-521 M2.5x5
- Screw M2.5x5
- Countersunk
- Cross Head
- Stainless steel
- DIN 965
- Package qty is 500 pcs per bag
- $0.18 each@500 pcs per bag
- Screw M2.5x16
- Countersunk
- Cross Head
- Steel
- DIN 965
- DIN 966
- EN 7046-2
- Package qty is 500 pcs per bag
- $0.15 each@500 pcs per bag
- Screw M2.5x11.3
- Cross head
- Captive Screw
- Package qty is 500 pcs per bag
- $0.31 each @ 500 pcs per bag
Cross Reference:
Same as 3687.051 Wakefield-Vette (3687051)
Same as 345-1362-ND DigiKey (3451362ND)
- Screw M3.2X12
- Pan head
- ISO 7045
- Captive Screw
- Package qty is 500 pcs per bag
- $.29 each @ 500 pcs per bag.
- Handle 3U 32mm L X 30mm D X 8mm W
- Low Profile
- Anodized aluminum
- 2pcs M4x10
- Torx screw countersunk 409-105-789 included with each handle
- Package qty is 10 pcs per bag
- $19.00 each @ 10 pcs per bag.
- For subrack FLEXIBLE Card Guide ECONOMY An inexpensive snap-in card guide that can also be secured to the horizontal rails with self tapping screws. Technical data Material Lexan 500 Color gray Continuous temperature – 40 °C up to + 115 °C Fire protection class UL 94 V–0 For card guide 1.6-220, see part number 409-047-601
- Z-rail - 84HP
- 425mm long
- M2.5 tap
- 3.8mm & 2.5mm holes
- 5 pcs per box
For covering empty sections or to carry various components in subracks. Four versions are available: 1. Flat front panel blank The front side is covered with a removable transparent foil. 2. Flat front panel anodized Front anodized, rear conductive. 3. Flat front panel RFI Front anodized, rear conductive, with slits in the side edges for insertion of RFI springs. 4. Extruded front panel RFI Made of extruded aluminum alloy, with slits in the side edges for insertion of RFI springs for contact. Surface finish is colorless chromated.
Blind Front Panels RFI Finish: flat front panel: front side anodized, rear side conductive extruded front panel: colorless chromated
Blind Front Panels RFI Finish: flat front panel: front side anodized, rear side conductive extruded front panel: colorless chromated
Finish: Flat front panel: front side anodized, rear side conductive Extruded front panel: colorless chromated
Consists of: 2 brackets and mounting parts Material: metal For housing styles C,D, F, H order no.: 409. 034 532 For housing style E order no.: 409. 034 533
Consists of: 2 brackets and mounting parts Material: zinc die-cast Finish: metallized
Material: black rubber for housing styles C, F, B order no.: 409. 032 766 for housing style E order no.: 409. 032 767
For easy screwless snap-on mounting of connectors accordance to IEC 60 603/ DIN 41 612. With a provision for a spring to contact front panels and for contacting a track near the PCB edge. This snap-in card guides can als be secured with screws.
For easy screwless snap-on mounting of connectors accordance to IEC 60 603/ DIN 41 612. With a provision for a spring to contact front panels and for contacting a track near the PCB edge. This snap-in card guides can als be secured with screws.
This card guide is in accordance to specification IEEE 1101.10. The required coding of the IEEE is integrated in the card guide head. With provision for the IEEE contact spring for groun ding of the alignmentpins of the PCB‘s front panel. Also with a provision for contacting a track near the PCB edge. This snap-in card guides can be secured with screws.
This card guide is also in accordance to specification IEEE 1101.10. For CompactPCI-power supplies and for Plug-in units fitted with SMD. With provision for the IEEE contact spring for grounding of the alignment pins of the PCB‘s front panel. Also with a provision for contacting a track near the PCB edge. This card guide is secured with screws.
This is an all purpose card guide with provision for a spring to contact front panels.
This is a length variable card guide constructed from 3 pieces. The center piece can be cut to any length. With a provision for a spring to contact front panels. These snap-in end pieces can also be secured with screws.
Lattice construction for heavy mechanical loads. With a provision for a spring to contact front panels and for contacting a track near the PCB edge. This card guides can be snapped in and/or secured with screws. Two versions: 1. With pressed-in nut M 2.5 for assembly to the horizontal rail with oval head screws M 2.5 x 12 2. Without a nut, but one can be added in the existing hexagonal molding.
Card Guide with integrated push and pull assist This special card guide with an integral small lever aids in the handling of PCB’s with high pin plug in connectors. The lever is supported by the walls of a special guide chamber when the board is pulled out or pushed in. It is suitable for a spring to contact a track near the PCB edge. This card guides are snapin and can be secured with screws.
Cassette with Cover Hood Kit constists of: 1 extruded side wall 1 cover hood 1 front panel, with slits in the side edges for insertion of RFI gaskets 1 handle 1 aluminum ident plate Mounting parts
Cassette with Extruded Side Walls The cassette kits includes following rear panels: 1. Rear panel closed (RG) 2. Rear panel with partical aperture (RT) 3. Rear panel with full aperture (RV).
Cassette with four Depth Profiles The cassette kits includes following rear panels: 1. Rear panel closed (RG) 2. Rear panel with partical aperture (RT) 3. Rear panel with full aperture (RV).
This cassette is designed for passive cooling of electronic sub assemblies and systems. The thermal power loss which is generated in the 19“ cassette is dissipated by a heat sink which also serves as sidewall. The heat sink is covered by an asymmetric front panel. Euroboards are being fitted into card guides which can be snapped in every possible position in the cassette. A wide range of accessories, for example rear cover, handle and handle strip in different colors and types are available. The front panel can be fitted with RFI springs to realize RFI shielding of the front of the subrack. Optionally the complete cassette can be RFI shielded.
Kit consists of: 2 mounting angles 4 castors Installation hardware
Quick Overview Center Profile ME1 Mounted in the rear of a 6 U subrack (type alpha). Material: aluminum Finish: anodized or colorless chromated
Quick Overview Center Profile ME2 Mounted in the rear of a 6 U subrack (type delta). Material: aluminum Finish: anodized or colorless chromated
Quick Overview Center Profile MZE Mounted in the rear of a 6 U subrack (type beta), With integrated connector attachment. Material: aluminum Finish: anodized or colorless chromated
Snapped on the head of standard card guides to comply to the requirements of the specification IEEE 1101.10 Functions: 1. Holding the IEEE contact spring for grounding the alignment pins of the front panel. 2. Adapting the IEEE coding pin. 3. Guiding the 1.6 to 2.4 mm thick PCB.
with 16 possibilities consists of: 4 coding elements and mounting parts
with 32 possibilities consists of: 4 coding elements and mounting parts
Connectors style B
Connectors style C
Connectors style D
Connectors style E
Connectors style F
Connectors style H
Connectors style H
Connectors style R
Contact Spring IEEE Snapped into the IEEE card guide or IEEE coding head to ground the alignment pin of the front panel. Material: tin-bronze order no.: 409. 113 450- Cover Plate Fs, slide-in Hole diameter 8.5 mm. The cover plate slides in special slots in the profiles. Material: aluminum, 1.5 mm thick Finish: blank, seawater resistant
Quick Overview Hole diameter 8.0 mm. The cover plate is mounted with self tapping counter sunk screws at the side panels and at the horizontal rails. Material: aluminum, 1 mm thick Finish: blank, seawater resistant- Quick Overview Hole diameter 4 / 5.2 x 4 mm. The cover plate is mounted with self tapping counter sunk screws on the inside of the side panels. Additionally the cover plate is secured to the horizontal rails by clips. Material: aluminum, 1 mm thick Finish: colorless chromated, seawater resistant
Overview Hole diameter 4 / 5.2 x 4 mm. The cover plate will be mounted with self tapping counter sunk screws outside of the side panels. Additionally the cover plate is secured to the horizontal rails by clips. Material: aluminum, 1 mm thick Finish: blank, seawater resistant- DiVar Desktop Housing with keyboard area Delivery 4 profiles 4 cover plates 2 side plates Assembly hardware
Quick Overview DiVar Desktop Housing with keyboard area Delivery 4 profiles 4 cover plates 2 side plates Assembly hardware
The special design features of the DiVar housing:- It consists of profiles into which aluminum, sheet steel, stainless steel or plastic panels with a thickness of 1.5 to 2.5 mm are inserted and, if desired, secured with screws. A wall panel at the rear and a panel at the front are screwed to the profiles.
- The flexible design allows variable configuration of the housing geometry in all three axes, this allowing adaptation of the housing to customer specific requirements.
- Different surfaces can be selected for an individual appearance.
- The proven RFI contact spring concept ensures optimum RFI shielding.
- Rails with threaded holes can be pressed into the profile grooves, for example to screw in PCBs or mounting plates.
- The extensive range of Intermas accessories allows unrestricted configuration and installation of both standardized and non-standard components.
Ejector Handle The ejector handle extends through the front panel and is screwed together with the bearing bushing at the front connector.
Feet Kit: 2 feet with tip-up 2 feet without tip-up 4 self-tapping screws Material: Ultramid Purchase Online: 409-059-640-Q10 Feet Kit Package
The flange can be mounted to the side panel by means of the mounting screws for the horizontal rails. Material: aluminum, extruded Finish: anodized
Flange for Wall Mounting For mounting of a subrack on a wall. Material: aluminum Finish: blank, seawater resistant
This flange is suitable for mounting of a continous front panel of 85 HP and a hinged front panel of 85 HP in a subrack. The flange will be mounted to the side panel by means of the mounting screws for the horizontal rails. Material: aluminum, extruded Finish: colorless chromated
Flange without Nose This flange can be mounted at various depth on the side panel grid. Material: aluminum, extruded Finish: anodized
Front Panels with IEEE Handle For easy pull of PCB’s with high density connectors accordance specification IEEE 1101.10. The assambled handle kit is stuck in the milled space of the front panel and is secured with a clamped spring. Afterwards the PCB are screwed on the intergrated front connector. Two versions with IEEE handle are available: 1. Flat front panel RFI Front anodized, rear conductive. With slits in the side edges for insertion of RFI springs. 2. Extruded front panel RFI Made of extruded aluminum alloy, with slits in the side edges for insertion of RFI springs or for contacting. Surface finish is colorless chromated.
Front Panels with Ejector Handle For easy release of PCB’s with high pin connections. The ejector handle is extends through the front panel and is screwed together with the bearing bushing at the front connector. Four versions are available: 1. Flat front panel blank. The front side is covered with a removable transparent foil. 2. Flat front panel anodized. Front anodized, rear conductive. 3. Flat front panel RFI Front anodized, rear conductive. With slits in the side edges for insertion of RFI springs. 4. Extruded front panel RFI Made of extruded aluminum alloy, with slits in the side edges for insertion of RFI springs for contact. Surface finish is colorless chromated.
For assembly on a PCB. Handle and front connector are screwed on the front panel. The plain front panel is easy to modify. Four versions are available: 1. Flat front panel blank The front side is covered with a removable transparent foil. 2. Flat front panel anodized Front anodized, rear conductive. 3. Flat front panel RFI Front anodized, rear conductive. With slits in the side edges for insertion of RFI springs. 4. Extruded front panel RFI Made of extruded aluminum alloy, with slits in the side edges for insertion of RFI springs for contact. Surface finish is colorless chromated.
Front Profile VE1 (also rear profile by using of a front panel on the rear). Material: aluminum Finish: anodized
For interface housings with female or male connector, for mating di rectly to the PCB (LP) connector. Installation in the wiring field of the subrack.
Guide component F for mounting of a 3 HP metal interface housing in any position of the mounting area.
Guide component F for mounting of a 3 HP metal interface housing RFI in the upper or lower area of 6 U subracks.gers.
Guide component F with integrated front panel for mounting of a 3 HP metal interface housing RFI in a 3 U subrack..
Material: aluminum Finish: anodized
Handle FP Assembled with M 2.5 screws and with 1 additional self tapping screw from 6 HP. The handle is held against torsion by means of two nipples.
Hinged Front Panel 85 HP With slits in the side edges for insertion of RFI springs. The hinge is screwed to the profiled rail of the subrack. An 84 HP threaded strip is needed. To be used in combination with below mentioned flanges only. Finish: front side anodized, rear side conductive Delivery: 1 front panel 1 hinge 3 grounding bushings Mounting parts Delivery: as unassembled kit. Assembled kits on request.
20 HP for horizontal mounting of 6 U PCB‘s in 3 U subracks. The horizontal mounting frame needs 52 HP in the width. For 84 HP subracks are available Placed right: 52 HP for horizontal mounting frame, 32 HP for 3 U PCB‘s Placed left: 52 HP for horizontal mounting frame, 1 HP for air and leakage paths, 31 HP for 3 U PCB‘s.
Ident Plate for handle FP. The ident plate is markable and printable, snapped in after mounting the handle to the front panel.
Ident-plate 4 HP The ident-plate is markable and printable. Snapped in after mounting the handle at the front panel. Material: aluminum Finish: silver silk matt anodized
Insulating Strip For insulated mounting of wiring supports, e. g. of the mounting rail B. Mounted between horizontal rail and wiring support.
Description The special design features of the InterCase desktop housing:- A desktop housing with a simple design for standardized plugin units and individual assemblies.
- The easy to access design allows all covering parts to be removed at any time.
- The bottom cover and the rear panel are provided with louvers.
- The side plates include perforations for attaching profile rails at different board depths.
- The comprehensive range of Intermas subrack accessories allows individual configuration of the desktop housing.
- Can be RFI-shielded.
The InterLock desktop housing has been designed to cover subracks. Also System-Module can be dressed up. The special design features of the InterLock desktop housing:- The covering elements are formed from recyclable polystyrene plate-material warmly and the joints are welded together by means of a chlorine carbon solution coldly.
- Material strength of 4 to 10 mm can be processed according to demand of the device.
- Easy assembly or disassembly of the case shells. Both case shells are locked by a clamp groove without screws.
- The case is upgradeable by feet and handles.
- However, on account of an economic manufacturing technology special dimensions or special colors can be also already realised for small quantities at a reasonable price.
- Extensive range of accessories is available.
The InterMeZo housing from Intermas is a modular and cost effective housing solution for high quality industrial electronics in a visually attractive design, developed for the highest possible flexibility and simplest possible assembly, with expansion capabilities for more deman ding needs, compliant with stringent EMI/ESD protection specifications, and with extensive configuration options to fulfil application specific requirements. Versions The InterMeZo housings are available to assembly 19” or metric subracks. Alternatively, any dimensions for variable applications are possible.
Your advantages- Shock and vibration resistant
- Water and dustproof
- Optimal HF-tightness
The flexible aluminium housings for small form factors are characterised by following properties:- customized adjustments
- quick and uncomplicated mounting
- appropriate for packaging of small electronic units like
- - euroboards
- - customized electronic
- - mITX Boards.
- protection up to IP67
- a wide range of colours for a finish
- additionally printing as customer requirements are possible
The dust- and hose-proof small casing InterShell IP allows customized electronic applications with following attributes.- custom specific adjustments
- quick ans und uncomplicated installation
- appropriate for:
- table-top housing for measuring and testing systems
- small case for customized applications
- mobile enclosures for external using
- protection class IP 65
- individual colour design.
Self adhesive. For identifiying PCB slots in the subrack. The PCB slot number can be read thru the hole in the front panel. Note: The label strip cannot be read while using the RFI spring P2. Material: PC/PE foil Color: yellow/black
This hinged labelling rail is mounted on the subrack flanges. Normally it is placed in front of the front panels. For ejecting a PCB, the rail is turned down.
For locking of PCB‘s witout front panels. The locking rail is mounted at the horizontal rail in front of the PCB‘s. A labeling strip can be insert into a groove.
Metal Interface Housings RFI 20 COD With integrated coding, for connector styles F 48, H15 and F24/H7 width(hp) 4
With integrated coding, for connector styles F 48, H15 and F24/H7 The Metal interface housings RFI 20 standard are not supplied with RFI springs.
For connectors styles E 48 and E 160.
For connector styles F 48, C96, H11, H15, and F24/H7.
Mounting Rail B tapped M 2.5 For mounting connectors in accordance to IEC 60 603/ DIN 41 612. For mounting at the rear profile on subracks type alpha with insulating strip and insulating bushings. For mounting at the rear profile on subracks type delta. Material: aluminum Finish: blank
Partition Wall For partitioning of a subrack part. The partition wall 6 U can also be used as a RFI shielded subrack divider in 6 U and 2x3 U parts.
This PCB cover protect the soldered side against dirt and contact. Two versions are available: A standard PCB cover and a PCB cover for use with a coding strip. The coding strip PCB cover can be used in connection with a coding strip on the connector.
PCB cover for coding strip 6U This PCB cover protect the soldered side against dirt and contact. Two versions are available: A standard PCB cover and a PCB cover for use with a coding strip. The coding strip PCB cover can be used in connection with a coding strip on the connector.
This PCB cover protect the soldered side against dirt and contact. Two versions are available: A standard PCB cover and a PCB cover for use with a coding strip. The coding strip PCB cover can be used in connection with a coding strip on the connector.
This PCB cover protect the soldered side against dirt and contact. Two versions are available: A standard PCB cover and a PCB cover for use with a coding strip. The coding strip PCB cover can be used in connection with a coding strip on the connector.
Secures PCB’s without front panels. Used for easy locking and ejecting of PCB’s
Secures PCB without front panels.
For interface housings with female connector, to attach on the connecting pins of a female connector. Installation in the wiring field of the subrack.
For interface housings with female connector, for mating with a male connector, on Backplane (BP).
For interface housings with female connector, for mating with a male connector, serves as a handle (GL), mounted on the service side of the subracks.
For interface housings with female connector, for mating with a male connector, serves as a handle (GL), mounted on the service side of the subracks.
For interface housings with female connector, for mating with a male connector, serves as a handle (GL), mounted on the service side of the subracks
For interface housings with female connector, for mating with an I element. Installation in the wiring field of the subrack.
For interface housings with female connector, to attach on the connecting pins of a U element. Installation in the wiring field of the sub rack.
Description This compact and insulating interface housing is designed to accommodate DIN 41 612 / IEC 60 603-2 connectors. It is physically clamped into position between guide elements. The interface housings have the following advantages:- Accommodation of either female or male connectors of any type of connection technology.
- Protects the connector during insertion and operation.
- Lifting screws ease insertion and removal.
- Three cable feed apertures.
- Strain relief.
- Allows installation of display and operating elements.
- Codable. Metallized plastic interface housing for RFI-shielding available.
Plug-in Front Panel 85 HP The front panel bottom edge is inserted in the groove of a specially profiled rail. With slits in the side edges for insertion of RFI springs. To be used in combination with below mentioned flanges only. Finish: front side anodized, rear side conductive Delivery: 1 front panel 3 grounding bushing M 2.5 3 crosshead screw M 2.5 x 11.3
Rear Cover F 84 HP For covering the wiring field of the subrack
Rear Cover RFI 84 HP Protective wiring rear cover for RFI shielded enclosure. Material: aluminum, 1 mm thick Finish: colorless chromated
Rear Cover RFI 84 HP, inside Protective wiring rear cover for RFI shielded enclosure. Material: aluminum, 1 mm thick Finish: colorless chromated
Rear Profile H22-RFI for screw on rear cover (type delta) For use with a rear cover. Material: aluminum Finish: colorless chromated
Quick Overview Rear Profile HE1 (type alpha). Material: aluminum Finish: anodized or colorless chromated- Quick Overview Rear Profile HE2 (type delta). Material: aluminum Finish: anodized or colorless chromated
Contact us directly to purchase this item. Quick Overview Rear Profile HE2 (type delta). Material: aluminum Finish: anodized or colorless chromated
RFI-spring P2 - 84 (profile/front panel)
RFI-Shielding Material: stainless steel
SE Bus Bars • High current capacity up to 120 A • Two connection types • 2 or 3 pole
Separating Wall For separating a subrack int two fields. Material: aluminum Finish: blank Delivery: 1 separating wall Mounting parts
Side Panel Connector Join two subracks, one above the other. The side panel connector is mounted to the side panels by means of the mounting screws for the horizontal rails. (nom. depth 160 mm). Material: aluminum, 2 mm thick Finish: blank
Side Panel Extender Elongate a side panel about 60 mm to obtain a larger cabling space. The side panel extender is mounted to the side panel by means of the mounting screws for the horizontal rails. Material: aluminum, 2 mm thick Finish: colorless chromated
Side Panel Fi (flange integrated) The side panel and the flange are extruded in one piece. Material: aluminum, extruded Finish: colorless anodized or colorless chromated
Material: aluminum, extruded Finish: colorless chromated
Material: aluminum, extruded Finish: colorless chromated
Side Panel RFI without flange Material: aluminum, 2.5 mm thick Finish: blank, seawater resistant
The system dimensions of the InterRail subrack are based on those of the FLEXIBLE Fi as a logical further development to produce a subrack for heavy-duty use. This allows unrestricted use of the extensive range of accessories. The special design features of the InterRail subrack: • Profile rails with a high section modulus guarantee resistance to vibrations. • The refined RFI-shielding concept enables high shielding effectiveness (see the RFI-SHIELDED chapter). THERE ARE FOUR VERSIONS OF THIS SUBRACK: 1. Subrack InterRail Shielding is not possible for the unsealed version. 2. Subrack InterRail RFI The RFI-shielded version. 3. Subrack InterRail RFI - IEEE The front is in accordance with IEEE 1101.10. The special profile rail is designed for the use of insertion and removal handles (optionally with a hot-swap function) for overcoming high insertion and removal resistance. The card guides are fitted with mechanical coding systems and special bonding for electrostatic discharge. 4. Subrack InterRail SNCF & InteRaiI SNCF RNI The special subrack with certification from the French Railways.
