Z-Rail A tapped M 2.5 For mounting connectors in accordance to IEC 60 603/ DIN 41 612 in subracks type alpha. Mounted on the rear profile. Material: aluminum Finish: colorless chromated
Wall and Door Installation Profile Kit For mounting subracks in a door, switch panel etc. The installation profiles are mounted to the side panel by means of the mounting screws to the horizontal rails.
Kit consists of: 2 unit supports and Installation hardware
Threaded Strip M 3 addable Material: steel Finish: galvanized, chromated
Threaded Strip M 3 Material: steel Finish: galvanized, chromated
Threaded Strip M 2.5 addable This threaded strip could be added to other strips and the space between the holes always adds up 5.08 mm. Material: steel Finish: galvanized, chromated
Threaded Strip M 2.5 - stainless steel For attaching the front panels and assembly parts at the wiring field. This threaded strip is for nonmagnetic applications. Material: stainless steel Finish: blank
Threaded Strip M 2.5 For attaching the front panels and assembly parts at the wiring field. Material: steel Finish: galvanized, chromated
Consists of: 1 Subrack RFI-SHIELDED CPCI / REAR I/O 84 HP, 260 mm nom. depth (160 mm at the front, 80 mm at the rear) 1 Backplane 8 Slot, 6 U, 64 Bit, system slot right 1 ATX 300W power supply unit with a wide-range input and PFC, with assembled front panel. (optional front panel for a drive over the power supply). 1 Blind front panel 16 HP at the front. 1 Blind front panel 4 HP at the front. 1 Blind front panel 48 HP at the rear. 1 Blind front panel 8 HP at the rear. 1 Pair of card guides red 160 mm (CPU) including IEEE-coding and ESD-spring in the bottom card guide. 1 Pair of card guides red 80 mm (CPU) including IEEE-coding and ESD-spring in the bottom card guide. 7 Pair of card guides black 160 mm (CPU) including IEEE-coding and ESD-spring in the bottom card guide. 7 Pair of card guides black 80 mm (CPU) including IEEE-coding and ESD-spring in the bottom card guide.
Consists of: 1 Subrack RFI-SHIELDED CPCI / REAR I/O 84 HP, 260 mm nom. depth (160 mm at the front, 80 mm at the rear) 1 Backplane 8 Slot, 3 U, 32 Bit, system slot right 1 ATX 300W power supply unit with a wide-range input and PFC, with assembled front panel. 1 Blind front panel 16 HP at the front. 1 Blind front panel 4 HP at the front. 1 Blind front panel 48 HP at the rear. 1 Blind front panel 8 HP at the rear. 1 Pair of card guides red 160 mm (CPU) including IEEE-coding and ESD-spring in the bottom card guide. 1 Pair of card guides red 160 mm (CPU) including IEEE-coding and ESD-spring in the bottom card guide. 7 Pair of card guides black 160 mm (CPU) including IEEE-coding and ESD-spring in the bottom card guide. 7 Pair of card guides black 80 mm (CPU) including IEEE-coding and ESD-spring in the bottom card guide.
Consists of: 1 Subrack RFI-SHIELDED CPCI / REAR I/O 84 HP, 260 mm nom. depth (160 mm at the front, 80 mm at the rear) 1 Backplane 8 Slot, 6 U, 64 Bit, system slot right 1 ATX 300W power supply unit with a wide-range input and PFC, with assembled front panel. (optional front panel for a drive over the power supply). 1 Blind front panel 16 HP at the front. 1 Blind front panel 4 HP at the front. 1 Blind front panel 48 HP at the rear. 1 Blind front panel 8 HP at the rear. 1 Pair of card guides red 160 mm (CPU) including IEEE-coding and ESD-spring in the bottom card guide. 1 Pair of card guides red 80 mm (CPU) including IEEE-coding and ESD-spring in the bottom card guide. 7 Pair of card guides black 160 mm (CPU) including IEEE-coding and ESD-spring in the bottom card guide. 7 Pair of card guides black 80 mm (CPU) including IEEE-coding and ESD-spring in the bottom card guide.
order no.: 409. 122 300 Consists of: 1 subrack RFI-SHIELDED CPCI / REAR I/O 84 HP, 260 mm nom. depth (160 mm at the front, 80 mm at the rear) for horizontal embedded 6 U PCB’s 1 Backplane 4 Slot, 6 U, 64 Bit, system slot right (1 Slot free e. g. for hard disk or driver) 2 Front panels 6 U - 4 HP (1 at the front, 1 at the rear) 1 ATX 300 W power supply unit with a wide-range input and PFC, with integrated 32 HP Front panel at the front. 1 Fan 1 Pair of card guides red 160 mm (CPU) including IEEE-coding and ESD-spring in the bottom card guide. 1 Pair of card guides red 80 mm (CPU) including IEEE-coding and ESD-spring in the bottom card guide. 4 Pair of card guides black 160 mm (CPU) including IEEE-coding and ESD-spring in the bottom card guide. 4 Pair of card guides black 80 mm (CPU) including IEEE-coding and ESD-spring in the bottom card guide
COMPACTPCI-3 U-Rear I/OI COMPACTPCI-6 U-Rear I/OI COMPACTPCI-4 U-Rear I/OI COMPACTPCI-6 +3U-Rear I/OI Consists of: 1 Subrack RFI-SHIELDED CPCI / REAR I/O 84 HP, 260 mm nom. depth (160 mm at the front, 80 mm at the rear) 1 Backplane 8 Slot, 3 U, 32 Bit, system slot right 1 ATX 300W power supply unit with a wide-range input and PFC, with assembled front panel. 1 Blind front panel 16 HP at the front. 1 Blind front panel 4 HP at the front. 1 Blind front panel 48 HP at the rear. 1 Blind front panel 8 HP at the rear. 1 Pair of card guides red 160 mm (CPU) including IEEE-coding and ESD-spring in the bottom card guide. 1 Pair of card guides red 80 mm (CPU) including IEEE-coding and ESD-spring in the bottom card guide. 7 Pair of card guides black 160 mm (CPU) including IEEE-coding and ESD-spring in the bottom card guide. 7 Pair of card guides black 80 mm (CPU) including IEEE-coding and ESD-spring in the bottom card guide
The system dimensions of the RFI- SHIELDED subrack are based on those of the FLEXIBLE subrack as a logical further development to produce the perfectly shielded subrack. This allows unrestricted use of the extensive and complete range of accessories. The special design features of the RFISHIELDED subrack: • The refined RFI shielding concept enables high shielding effectiveness. • The stable stainless steel contact springs ensure permanent and reliable bonding, even after a large number of plug-in cycles. • The perforated RFI cover plates guarantee optimal air flow for improved heat dissipation. • The use of high-quality, seawater-resistant aluminum alloys and stainless steel materials removes, for the most part, the need for unnecessary, environmentally harmful surface treatment. THERE ARE 3 VERSIONS OF THIS SUBRACK 1. Subrack RFI-SHIELDED The standard RFI-shielded version. 2. Subrack RFI-SHIELDED IEEE The front is in accordance with IEEE 1101.10. The special profile rail is designed for the use of inser tion and removal handles (optionally with a hot swap function) for overcoming high insertion and removal resistance. The card guides are fitted with mechanical coding systems and special bonding for electrostatic discharge. 3. Subrack RFI-SHIELDED IEEE / Rear I/O The front and the rear are in accordance with IEEE 1101.10/11. This enables insertion and removal of modules with a front panel from both the front and the rear of the subrack.
The front and the rear are in accordance with IEEE 1101.10/11. This enables insertion and removal of modules with a front panel from both the front and the rear of the subrack.
The front is in accordance with IEEE 1101.10. The special profile rail is designed for the use of insertion and removal handles (optionally with a hot-swap function) for overcoming high insertion and removal resistance.
The Subrack InterRail SNCF is a special subrack with certification from the French Railways. The system dimensions of the InterRail subrack are based on those of the FLEXIBLE Fi as a logical further development to produce a subrack for heavy-duty use. This allows unrestricted use of the extensive range of accessories.
Subrack RFI-SHIELDED IEEEdance with IEEE 1101.10. The special profile rail is designed for the use of insertion and removal handles (optionally with a hot-swap function) for overcoming high insertion and removal resistance.
Subrack InterRail RFI The RFI-shielded version. The system dimensions of the InterRail subrack are based on those of the FLEXIBLE Fi as a logical further development to produce a subrack for heavy-duty use. This allows unrestricted use of the extensive range of accessories. The special design features of the InterRail subrack: • Profile rails with a high section modulus guarantee resistance to vibrations. • The refined RFI-shielding concept enables high shielding effectiveness (see the RFI-SHIELDED chapter).
The Subrack InterRail SNCF is a special subrack with certification from the French Railways. The system dimensions of the InterRail subrack are based on those of the FLEXIBLE Fi as a logical further development to produce a subrack for heavy-duty use. This allows unrestricted use of the extensive range of accessories.
The FLEXIBLE Fs Subrack (with a separate flange) The side wall and flange are separate components so the flange can be screwed to the side panel at the front or the rear.
The FLEXIBLE Fi Subrack (with an integrated flange) The combination of the side wall and mounting flange form a single unit. This is the simple and cost effective version. This standard version can not be shielded.
The special design features of the subrack FLEXIBLE:- For mounting of the profile rails the side wall is perforated with a grid of 10 mm to allow installation of modules in depth steps of 10 mm. This results in a flexible amount of free space behind the wiring level or in front of the operating level.
- The profile rails are connected to the side wall at the front using a special screw which ensures electrical bonding of the parts via a ring cutter under the head.
- The front and rear profile rails can be interchanged such that the wiring level which is normally at the rear can be implemented at the front of the subrack.
- The extensive range of accessories allows individual configuration.
- Fast and simple assembly: Easy positioning of the profile rails thanks to raised embossing on the side wall.
Subrack Divider Kit 2 x 3 U - 84 HP For partitioning a 6 U subrack in 2 x 3 U.
Subrack Divider Kit 2 x 3 U - 42 HP and 6 U - 40 HP The divider separates a 6 U subrack into a field for 6 U PCB’s and 2 fields of 3 U. Finish: colorless chromated Delivery: 1 double front profile 2xVE1 43 HP chromated 1 double rear profile 2xHK 43 HP anodized 2 divider strips Assembly: Mounting parts
The system dimensions of the InterRail subrack are based on those of the FLEXIBLE Fi as a logical further development to produce a subrack for heavy-duty use. This allows unrestricted use of the extensive range of accessories. The special design features of the InterRail subrack: • Profile rails with a high section modulus guarantee resistance to vibrations. • The refined RFI-shielding concept enables high shielding effectiveness (see the RFI-SHIELDED chapter). THERE ARE FOUR VERSIONS OF THIS SUBRACK: 1. Subrack InterRail Shielding is not possible for the unsealed version. 2. Subrack InterRail RFI The RFI-shielded version. 3. Subrack InterRail RFI - IEEE The front is in accordance with IEEE 1101.10. The special profile rail is designed for the use of insertion and removal handles (optionally with a hot-swap function) for overcoming high insertion and removal resistance. The card guides are fitted with mechanical coding systems and special bonding for electrostatic discharge. 4. Subrack InterRail SNCF & InteRaiI SNCF RNI The special subrack with certification from the French Railways.
Side Panel RFI without flange Material: aluminum, 2.5 mm thick Finish: blank, seawater resistant
Material: aluminum, extruded Finish: colorless chromated
Material: aluminum, extruded Finish: colorless chromated
Side Panel Fi (flange integrated) The side panel and the flange are extruded in one piece. Material: aluminum, extruded Finish: colorless anodized or colorless chromated
Side Panel Extender Elongate a side panel about 60 mm to obtain a larger cabling space. The side panel extender is mounted to the side panel by means of the mounting screws for the horizontal rails. Material: aluminum, 2 mm thick Finish: colorless chromated
Side Panel Connector Join two subracks, one above the other. The side panel connector is mounted to the side panels by means of the mounting screws for the horizontal rails. (nom. depth 160 mm). Material: aluminum, 2 mm thick Finish: blank
Separating Wall For separating a subrack int two fields. Material: aluminum Finish: blank Delivery: 1 separating wall Mounting parts
SE Bus Bars • High current capacity up to 120 A • Two connection types • 2 or 3 pole
RFI-Shielding Material: stainless steel
RFI-spring P2 - 84 (profile/front panel)
Quick Overview Rear Profile HE2 (type delta). Material: aluminum Finish: anodized or colorless chromated
Contact us directly to purchase this item. Quick Overview Rear Profile HE2 (type delta). Material: aluminum Finish: anodized or colorless chromated
Quick Overview Rear Profile HE1 (type alpha). Material: aluminum Finish: anodized or colorless chromated
Rear Profile H22-RFI for screw on rear cover (type delta) For use with a rear cover. Material: aluminum Finish: colorless chromated
Rear Cover RFI 84 HP, inside Protective wiring rear cover for RFI shielded enclosure. Material: aluminum, 1 mm thick Finish: colorless chromated
Rear Cover RFI 84 HP Protective wiring rear cover for RFI shielded enclosure. Material: aluminum, 1 mm thick Finish: colorless chromated
Rear Cover F 84 HP For covering the wiring field of the subrack
Plug-in Front Panel 85 HP The front panel bottom edge is inserted in the groove of a specially profiled rail. With slits in the side edges for insertion of RFI springs. To be used in combination with below mentioned flanges only. Finish: front side anodized, rear side conductive Delivery: 1 front panel 3 grounding bushing M 2.5 3 crosshead screw M 2.5 x 11.3
Description This compact and insulating interface housing is designed to accommodate DIN 41 612 / IEC 60 603-2 connectors. It is physically clamped into position between guide elements. The interface housings have the following advantages:- Accommodation of either female or male connectors of any type of connection technology.
- Protects the connector during insertion and operation.
- Lifting screws ease insertion and removal.
- Three cable feed apertures.
- Strain relief.
- Allows installation of display and operating elements.
- Codable. Metallized plastic interface housing for RFI-shielding available.
For interface housings with female connector, to attach on the connecting pins of a U element. Installation in the wiring field of the sub rack.
For interface housings with female connector, for mating with an I element. Installation in the wiring field of the subrack.
For interface housings with female connector, for mating with a male connector, serves as a handle (GL), mounted on the service side of the subracks
For interface housings with female connector, for mating with a male connector, serves as a handle (GL), mounted on the service side of the subracks.
For interface housings with female connector, for mating with a male connector, serves as a handle (GL), mounted on the service side of the subracks.
