For interface housings with female connector, for mating with a male connector, serves as a handle (GL), mounted on the service side of the subracks.
For interface housings with female connector, for mating with a male connector, serves as a handle (GL), mounted on the service side of the subracks
For interface housings with female connector, for mating with an I element. Installation in the wiring field of the subrack.
For interface housings with female connector, to attach on the connecting pins of a U element. Installation in the wiring field of the sub rack.
Description This compact and insulating interface housing is designed to accommodate DIN 41 612 / IEC 60 603-2 connectors. It is physically clamped into position between guide elements. The interface housings have the following advantages:- Accommodation of either female or male connectors of any type of connection technology.
- Protects the connector during insertion and operation.
- Lifting screws ease insertion and removal.
- Three cable feed apertures.
- Strain relief.
- Allows installation of display and operating elements.
- Codable. Metallized plastic interface housing for RFI-shielding available.
COMPACTPCI-3 U-Rear I/OI COMPACTPCI-6 U-Rear I/OI COMPACTPCI-4 U-Rear I/OI COMPACTPCI-6 +3U-Rear I/OI Consists of: 1 Subrack RFI-SHIELDED CPCI / REAR I/O 84 HP, 260 mm nom. depth (160 mm at the front, 80 mm at the rear) 1 Backplane 8 Slot, 3 U, 32 Bit, system slot right 1 ATX 300W power supply unit with a wide-range input and PFC, with assembled front panel. 1 Blind front panel 16 HP at the front. 1 Blind front panel 4 HP at the front. 1 Blind front panel 48 HP at the rear. 1 Blind front panel 8 HP at the rear. 1 Pair of card guides red 160 mm (CPU) including IEEE-coding and ESD-spring in the bottom card guide. 1 Pair of card guides red 80 mm (CPU) including IEEE-coding and ESD-spring in the bottom card guide. 7 Pair of card guides black 160 mm (CPU) including IEEE-coding and ESD-spring in the bottom card guide. 7 Pair of card guides black 80 mm (CPU) including IEEE-coding and ESD-spring in the bottom card guide
Blind Front Panels RFI Finish: flat front panel: front side anodized, rear side conductive extruded front panel: colorless chromated
Finish: Flat front panel: front side anodized, rear side conductive Extruded front panel: colorless chromated
Ejector Handle The ejector handle extends through the front panel and is screwed together with the bearing bushing at the front connector.
Front Panels with IEEE Handle For easy pull of PCB’s with high density connectors accordance specification IEEE 1101.10. The assambled handle kit is stuck in the milled space of the front panel and is secured with a clamped spring. Afterwards the PCB are screwed on the intergrated front connector. Two versions with IEEE handle are available: 1. Flat front panel RFI Front anodized, rear conductive. With slits in the side edges for insertion of RFI springs. 2. Extruded front panel RFI Made of extruded aluminum alloy, with slits in the side edges for insertion of RFI springs or for contacting. Surface finish is colorless chromated.
Front Panels with Ejector Handle For easy release of PCB’s with high pin connections. The ejector handle is extends through the front panel and is screwed together with the bearing bushing at the front connector. Four versions are available: 1. Flat front panel blank. The front side is covered with a removable transparent foil. 2. Flat front panel anodized. Front anodized, rear conductive. 3. Flat front panel RFI Front anodized, rear conductive. With slits in the side edges for insertion of RFI springs. 4. Extruded front panel RFI Made of extruded aluminum alloy, with slits in the side edges for insertion of RFI springs for contact. Surface finish is colorless chromated.
For assembly on a PCB. Handle and front connector are screwed on the front panel. The plain front panel is easy to modify. Four versions are available: 1. Flat front panel blank The front side is covered with a removable transparent foil. 2. Flat front panel anodized Front anodized, rear conductive. 3. Flat front panel RFI Front anodized, rear conductive. With slits in the side edges for insertion of RFI springs. 4. Extruded front panel RFI Made of extruded aluminum alloy, with slits in the side edges for insertion of RFI springs for contact. Surface finish is colorless chromated.
Handle FP Assembled with M 2.5 screws and with 1 additional self tapping screw from 6 HP. The handle is held against torsion by means of two nipples.
Hinged Front Panel 85 HP With slits in the side edges for insertion of RFI springs. The hinge is screwed to the profiled rail of the subrack. An 84 HP threaded strip is needed. To be used in combination with below mentioned flanges only. Finish: front side anodized, rear side conductive Delivery: 1 front panel 1 hinge 3 grounding bushings Mounting parts Delivery: as unassembled kit. Assembled kits on request.
Ident Plate for handle FP. The ident plate is markable and printable, snapped in after mounting the handle to the front panel.
Ident-plate 4 HP The ident-plate is markable and printable. Snapped in after mounting the handle at the front panel. Material: aluminum Finish: silver silk matt anodized
Plug-in Front Panel 85 HP The front panel bottom edge is inserted in the groove of a specially profiled rail. With slits in the side edges for insertion of RFI springs. To be used in combination with below mentioned flanges only. Finish: front side anodized, rear side conductive Delivery: 1 front panel 3 grounding bushing M 2.5 3 crosshead screw M 2.5 x 11.3
Subrack RFI-SHIELDED IEEEdance with IEEE 1101.10. The special profile rail is designed for the use of insertion and removal handles (optionally with a hot-swap function) for overcoming high insertion and removal resistance.
The Subrack InterRail SNCF is a special subrack with certification from the French Railways. The system dimensions of the InterRail subrack are based on those of the FLEXIBLE Fi as a logical further development to produce a subrack for heavy-duty use. This allows unrestricted use of the extensive range of accessories.
The Subrack InterRail SNCF is a special subrack with certification from the French Railways. The system dimensions of the InterRail subrack are based on those of the FLEXIBLE Fi as a logical further development to produce a subrack for heavy-duty use. This allows unrestricted use of the extensive range of accessories.
Your advantages- Shock and vibration resistant
- Water and dustproof
- Optimal HF-tightness
Cover Plate Fs, slide-in Hole diameter 8.5 mm. The cover plate slides in special slots in the profiles. Material: aluminum, 1.5 mm thick Finish: blank, seawater resistant
Wall and Door Installation Profile Kit For mounting subracks in a door, switch panel etc. The installation profiles are mounted to the side panel by means of the mounting screws to the horizontal rails.
Front Profile VE1 (also rear profile by using of a front panel on the rear). Material: aluminum Finish: anodized
Insulating Strip For insulated mounting of wiring supports, e. g. of the mounting rail B. Mounted between horizontal rail and wiring support.
RFI-spring P2 - 84 (profile/front panel)
Connectors style H
SE Bus Bars • High current capacity up to 120 A • Two connection types • 2 or 3 pole- DiVar Desktop Housing with keyboard area Delivery 4 profiles 4 cover plates 2 side plates Assembly hardware
Quick Overview DiVar Desktop Housing with keyboard area Delivery 4 profiles 4 cover plates 2 side plates Assembly hardware
Quick Overview Hole diameter 8.0 mm. The cover plate is mounted with self tapping counter sunk screws at the side panels and at the horizontal rails. Material: aluminum, 1 mm thick Finish: blank, seawater resistant
Overview Hole diameter 4 / 5.2 x 4 mm. The cover plate will be mounted with self tapping counter sunk screws outside of the side panels. Additionally the cover plate is secured to the horizontal rails by clips. Material: aluminum, 1 mm thick Finish: blank, seawater resistant
Quick Overview Center Profile ME1 Mounted in the rear of a 6 U subrack (type alpha). Material: aluminum Finish: anodized or colorless chromated
Quick Overview Center Profile MZE Mounted in the rear of a 6 U subrack (type beta), With integrated connector attachment. Material: aluminum Finish: anodized or colorless chromated
Quick Overview Center Profile ME2 Mounted in the rear of a 6 U subrack (type delta). Material: aluminum Finish: anodized or colorless chromated
Quick Overview Rear Profile HE1 (type alpha). Material: aluminum Finish: anodized or colorless chromated- Quick Overview Hole diameter 4 / 5.2 x 4 mm. The cover plate is mounted with self tapping counter sunk screws on the inside of the side panels. Additionally the cover plate is secured to the horizontal rails by clips. Material: aluminum, 1 mm thick Finish: colorless chromated, seawater resistant
- Quick Overview Rear Profile HE2 (type delta). Material: aluminum Finish: anodized or colorless chromated
Contact us directly to purchase this item. Quick Overview Rear Profile HE2 (type delta). Material: aluminum Finish: anodized or colorless chromated
Hex Screw, M5-0.8 X 50mm, 100 pcs
For subrack FLEXIBLE Card Guide ECONOMY An inexpensive snap-in card guide that can also be secured to the horizontal rails with self tapping screws. Technical data Material Lexan 500 Color gray Continuous temperature – 40 °C up to + 115 °C Fire protection class UL 94 V–0 For card guide 1.6-220, see part number 409-047-601
M5-0.8 HEX Nut,DIN934, steel chromated, 500pcs
- Integrated washer!
- 1000 pcs per bag
- 4X16
- DIN 933
- 8.8 Steel plain finish
- Full Thread. $0.18 each @ 1000 pcs per bag
- Z-rail - 15HP
- 75mm long
- M2.5 tap
- 14 holes
- 5 pcs per box
- Z-rail - 31HP
- 156mm long
- M2.5 tap
- 30 holes
- 5 pcs per box
-
- Z-rail - 42HP
- 212mm long
- M2.5 tap
- 41 holes
- 5 pcs per box
-
- Z-rail - 84HP
- 425mm long
- M2.5 tap
- 83 holes
- 5 pcs per box
- Z-rail - 84HP
- 425mm long
- M2.5 tap
- 3.8mm & 2.5mm holes
- 5 pcs per box
- Z-rail - 84HP
- 425mm long
- M2.5 tap
- 3.8mm holes
- 5 pcs per box
- Square nut M2.5, 5x5mm
- DIN562
- steel, galvanized, chromated
- Package qty is 500 pcs per bag
